Badger Meter Fluid Management System - Manual (Page 13)

Installation & Operation Manual
Return to RF Mode
To return to the RF Mode from the EPM Mode:
1. If the batch quantity on the display is not zero, press the RESET button to zero the
display.
2. Press the RESET button with a zero batch quantity on the display.
You’ll see the flashing arrows indicating the meter is communicating with the
RF System.
3. When communication is complete, the meter returns to the RF Mode and the
trigger locks.
To manually reset the meter to the RF Mode:
1. If the batch quantity on the display is not zero, press the RESET button to zero the
display
2. Re-enter the Manual Mode key sequence.
Arrows
Page 13 November 2012