Badger Meter ReadCenter - Manual (Page 18)

Page 18 10-11
READCENTER® Reading Data Management
Gateway Reading Reports
The Gateway Reading Reports function provides the ability to view meter readings by transmitter serial number and to view
readings that match various criteria as shown below. A report or graph can be displayed or printed.
1. Select a report from the list.
2. Specify a date range to cover using
the End Date and Period settings.
3. Click Run Report to run the report.
NOTE: The selected date range will
display in the tool bar at the bottom of
the screen.
Here is a History report example covering reads over a period of time.
Screen Layout for History Report
• The middle section of the screen shows a table of transmitters with meter readings collected during the time
specified. As you point to each transmitter in the table, meter readings the transmitter reported during that time
are shown on the right section of the screen. The number of the selected transmitter and the history line item are
also displayed in the bottom tool bar – 179:191 in the screen shown above.
• Two text boxes are displayed in the bottom tool bar next to the Close button. The number of transmitters is on the
left and the number of meter readings the transmitter reported is on the right.