Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 7)

Installation Manual
STTNDTRD COMPONENTS
• One (1) gateway transceiver assembly with attached mounting backplate and TX/RX fiberglass antennas
• One (1) backhaul antenna (CDMA or GPRS gateway units)
• V-block clamps or banding and locking equipment for attaching the gateway to a pole
• 100-foot or 300-foot power cable, M12 plug (not included with LAN configuration if Ethernet (PoE) is used for
power), RJ45 plug assembly for LAN configuration, AC-to-DC power supply and power cord
• Extra locknuts (replacements)
NOTE: N Refer to the packing list, shipped with the gateway, for the complete list of gateway components .
Figure 1: ORION Fixed Network II network gateway components
FAILURE TO READ AND FOLLOW THE INSTRUCTIONS IN THIS MANUAL CAN LEAD TO MISAPPLICATION OR
MISUSE OF THE ORION FIXED NETWORK GATEWAY TRANSCEIVER, RESULTING IN PERSONAL INJURY AND DAMAGE TO
THE EQUIPMENT.
Transceiver Enclosure Cover
Backhaul Antenna Bracket
TX/RX Fiberglass
Antennas
Backhaul Antenna
M12 Connection (Included
with all configurations)
Antenna Mounting Bracket
Enclosure Bracket Connected
to Mounting Backplate
Page 7 March 2014