West Control Solutions KS 800 CANopen Interface Manual - Manual (Page 32)

KS 800 CAN-Interface
3028 VAR Forced dig. output OUT9...OUT16 Unsigned8 rw * 2.1
3029 VAR Forced dig. output OUT17...OUT19 Unsigned8 rw * see
name
FB input
Process data fct. no. 0
3100 ARRAY Signal input fail Input_X_Failed Unsigned8 ro 1.0
3101 ARRAY Main variable x1 FixedPoint1 ro 1.0
3102 ARRAY Raw measurement value before meas.val.corr.
INP1 FixedPoint1 ro 1.0
Parameter and configuration data fct. no. 1
3110 ARRAY Measurement value correction X1 input X1in FixedPoint1 rw 1.0
3111 ARRAY Measurement value correction X1 output X1out FixedPoint1 rw 1.0
3112 ARRAY Measurement value correction X2 X2in FixedPoint1 rw 1.0
3113 ARRAY Measurement value correction X2 X2out FixedPoint1 rw 1.0
3114 ARRAY Sensor type (T,H) C200 Unsigned16 rw * 1.0
3115 ARRAY Fail: sensor break (T) C205 Unsigned16 rw * 1.0
3116 ARRAY Phys. value at 0% X0 FixedPoint1 rw * 1.0
3117 ARRAY Phys. value at 100% X100 FixedPoint1 rw * 1.0
3118 ARRAY Substitute value at sensor fail XFail FixedPoint1 rw * 1.0
3119 ARRAY Filter time const. meas. value processing Tfm FixedPoint1 rw * 1.0
311A ARRAY Reference temperature Tkref FixedPoint1 rw * 1.0
311B ARRAY Signal allocation dig. signals C190 Unsigned16 rw * 1.0
FB analog out
Process data fct. no. 0
3130 ARRAY Forced analog output AOUT1...AOUT8 FixedPoint1 rw 3.0
3140 ARRAY Xo FixedPoint1 rw * 3.0
3141 ARRAY X100 FixedPoint1 rw * 3.0
3142 ARRAY Mode/Scr A-Out C540 Unsigned16 rw * 3.0
FB controller
Process data fct. no. 0
3200 ARRAY Status 1 Unsigned8 ro 1.0
3201 ARRAY Eff. set-point Weff FixedPoint1 ro 1.0
3202 ARRAY Eff. process value Xeff FixedPoint1 ro 1.0
3203 ARRAY Effective correcting variable Ypid FixedPoint1 ro 1.0
3204 ARRAY Control deviation xw FixedPoint1 ro 1.0
3205 ARRAY Automatic/manual switch-over Unsigned8 rw 1.0
3206 ARRAY Controller self-tuning start OStart Unsigned8 rw 1.0
32 9499 040 49511