West Control Solutions MRC 7000 Recorder Manual - Manual (Page 57)

57
Input Specifications
THERMOCOUPLE
TYPE RANGE TYPE RANGE
J 0 to 760 C E 0 to 750 C
0 to 1400 F 0 to 1400 F
K 0 to 1360 C B 200 to 1800 C
0 to 2500 F 400 to 3300 F
T -220 to 400 C N 0 to 1300 C
-330 to 750 F 0 to 2370 F
R 200 to 1650 C C 200 to 2300 C
400 to 3000 F 390 to 4170 F
S 200 to 1650 C
400 to 3000 F
MILLIAMPS VOLTS RTD
4-20mADC 0 to 5VDC 100 OHM
(with resistor) 1 to 5 VDC (.00385 OHMS/OHM/C)
-140 to 400 C
MILLIVOLTS
-220 to 750 F
0 to 25 mV
0 to 50mV
10 to 50mV
(can be scaled to any portion of this range)
ALARM ADJUSTMENTS
Process Alarm -9999 to 9999 units
Hysteresis 0 to 300 units
ALARM OUTPUT
Relay SPST
115VAC: 5.0A Resistive, 1/8HP or 250VA
230VAC: 2.5A Resistive, 1/8HP or 250VA
SSR Driver Open collector output
Short circuit protected @ 100mA maximum.
Provides 4VDC at 20mA or 3 VDC at 40mA.
PROCESS OUTPUT
4-20 or 0 -20 mADC into 650 ohms maximum load.
DISPLAY
Digital Display Two possible; one per installed pen. Red LED's 0.56 "
high.
Status Indicators LED indicators for Alarm 1 and Alarm 2, and process
value units, as applicable for each model (
°
F,
°
C, and U).