Thermo Fisher Scientific CyberScan CON 510 - Manual (Page 4)

TABLE OF CONTENTS
1 INTRODUCTION 1
2 DISPLAY AND KEYPAD FUNCTIONS 1
2.1 Display 1
2.2 Keypad 2
3 PREPARATION 3
3.1 Conductivity Electrode Information 3
3.2 Connecting the probe to the meter 3
3.3 Connecting the AC/DC Adapter 3
3.4 Connecting the Electrode Holder 4
4 CALIBRATION 5
4.1 Important Information on Meter Calibration 5
4.2 Preparing the Meter for Calibration 6
4.3 Calibration with Conductivity Standards and TDS factor 6
4.4 Calibration for TDS Standards Directly 6
4.5 Selection of Automatic or Manual Calibration 6
4.6 Automatic Calibration 7
4.7 Manual Calibration 8
4.8 Temperature Calibration 9
5 MEASUREMENT 10
5.1 Automatic Temperature Compensation 10
5.2 Manual Temperature Compensation 11
5.3 Taking Measurements 11
5.4 Using Manual Ranging Function 12
5.5 HOLD Function 12
6 MEMORY AND DATA INPUT FUNCTIONS 13
6.1 Memory Input 13
6.2 Memory Recall 13
7 SETUP FUNCTIONS 14
7.1 SETUP Mode Overview 14
7.2 P1.0: Viewing Calibration Data 15
7.3 P2.0: Viewing Electrode Diagnosis 16
7.4 P3.0: Meter Configuration 16
7.5 P4.0: Temperature 18
7.6 P5.0 Mode of calibration 20
7.7 P6.0 Selecting the cell constant 21
7.8 P7.0: Resetting to factory default settings 22
8 PROBE CARE AND MAINTENANCE 23
9 TROUBLE SHOOTING GUIDE 24
10 ERROR MESSAGES 24
11 SPECIFICATIONS 25
12 ACCESSORIES 26
13 ADDENDUM 1: CALIBRATION TIPS 27
14 ADDENDUM 2: CALCULATING TDS CONVERSION FACTORS 27
15 ADDENDUM 3: CALCULATING TEMPERATURE COEFFICIENTS 28
16 ADDENDUM 4: METER FACTORY DEFAULT SETTINGS 29
17 WARRANTY 30
18 RETURN OF ITEMS 30