Addendum 1: turbidity, 1 definition, 2 why is it important – Thermo Fisher Scientific TN100 Turbidimeter User Manual
Page 24: 3 measurement principle, Measurement principle, E 19), Definition, Why is it important

Instruction Manual
TN-100/ T-100
19
8. Addendum 1: Turbidity
8.1
Definition
Turbidity is defined as an “expression of the optical property that causes light to be
scattered and absorbed rather than transmitted in straight lines through the sample.”
Water with cloudy or opaque appearance will have high turbidity, while water that is
clear or translucent will have low turbidity. High turbidity value is caused by particles
such as slit, clay, microorganisms, and organic matter. By definition, turbidity is not a
direct measure of these particles but rather a measure of how these particles scatter
light.
That is, turbidity is the measure of relative sample clarity, not colour.
8.2
Why Is It Important?
For drinking water application, a turbidity value may give an indication of presence of
bacteria, pathogens, or particles that can shelter harmful organisms from disinfection
process. Therefore, turbidity measurement is particularly useful for water treatment
plants to ensure cleanliness.
In industrial processes, turbidity can be part of quality control measure to ensure
efficiency in treatment or manufacturing process.
8.3
Measurement Principle
There are two internationally accepted standard specifications for turbidity
measurement. These are the international standard ISO 7027 and the US EPA method
180.1.
Basically the ISO 7027 is a more stringent standard and requires the use of a
monochromatic light source. It also governs the design of a turbidimeter in the following
areas: (1) Light source’s wavelength; (2) Light sources’ spectral bandwidth; (3)
Measuring angle; (4) Aperture angle in water sample; (5) Distance traversed by
incident light and scattered light within the sample; (6) Calibration standard.
The TN-100/ T-100 turbidimeter follows the ISO 7027 standard whose specification
allows for greater reproducibility of the measured values and greater agreement
between other measuring instruments.
1
Provided by “Standard Methods for the Examination of Water and Wastewater, APHA, AWWA and
WPCF, 16
th
Edition, 1985.