General software features – Techne Prime Elite User Manual
Page 22
20
GENERAL SOFTWARE FEATURES
INTRODUCTION
The Prime Elite software allows the user to quickly and easily create thermal cycling programs using a
simple and clear touch screen format. The software is structured into five modules which are accessed
from the Home Screen. These allow the user to:
• Run an existing program, selecting from
templates or programs saved on the unit.
• Create a new program.
• Set instrument and program defaults and
preferences. Includes calculator tools.
• View the current status of connected units.
• View and search for files stored on the unit.
TEMPLATE PROGRAMS
To help with programming, a number of program templates are installed on the unit which are
available to copy and edit or can be run directly without changes. Details of the installed program
templates are given below.
Instrument and program defaults
Parameter
2 Step Template
3 Step Template
RT-PCR Template
Heated Lid
105ºC
105ºC
105ºC
Heated lid before program
On
On
On
Sample cooling
On
On
On
Pause before program
Off
Off
Off
Initial denaturation
94ºC, 05m00s
94ºC, 05m00s
94ºC, 05m00s
Hot start
Off
Off
Off
Final extension
72ºC, 05m00s
72ºC, 05m00s
72ºC, 07m00s
Final hold
10ºC
10ºC
10ºC
Thermal cycling conditions
2 Step Template
3 Step Template
RT-PCR Template
Stage 1
Number of cycles
30
30
1
Step 1
94.0ºC, 00m30s
94.0ºC, 00m30s
45.0ºC, 40m00s
Step 2
60.0ºC, 01m00s
55.0ºC, 00m30s
94.0ºC, 05m00s
Step 3
72.0ºC, 00m30s
Stage 2
Number of cycles
40
Step 1
94.0ºC, 01m00s
Step 2
55.0ºC, 00m50s
Step 3
72.0ºC, 01m00s