Techne TC-5000 - Manual (Page 46)

45
SYSTEM ADMINISTRATION
This section of the software contains settings for the instrument, rather than the actual programs.
From various sub-menus it is possible to change passwords for programs and the instrument, test the
instrument, delete current programs stored on the memory card and completely reset the instrument.
To access the System Admin simply press the
"System Admin" button on the start-up
screen.
The software will then ask for a password.
Type in the default password TECHNE using
the touch screen as shown opposite.
To exit the password screen press "Cancel".
Pressing "Enter" takes the user through to
the system administration menu.
The System Administration Menu.
Techne
TC-5000
System
Test
System
Config.
Exit
Sys Admin
Password
Program
Passwords
Controller
Reset
Enter password
Q W E R T Y U I O
A S D F G H J K L
Z Num X C V B N M Enter
➔
Cap Space ➔ BS Cancel
P
******
Techne
TC-5000
System
User
System
Admin
Serial number xxxxxx/xx
Software version v.vv
Hardware version h.hh
Block ID FSG - 60x0.5ml
Last system test dd/mm/yyyy
Comms address 01
Copyright protected 2003