Spectrex Xenon 700 SIL Open-Path Gas Detection System - Manual (Page 5)

About this Guide v
About this Guide
This guide describes the SafEye TM Xenon 700S SIL Gas Detection System
and its features and provides instructions on how to install, operate and
maintain the detector.
This guide includes the following chapters and appendixes:
 Chapter 1, Scope, provides a general introduction and overview of the
product and the guide, with a brief description of its content.
 Chapter 2, Technical Description, describes the Detector’s theory of
operation.
 Chapter 3, Operation Mode, describes the Detector’s operation
modes, user interface and indications.
 Chapter 4, Technical Specifications, describes the Detector’s
electrical, mechanical and environmental specifications.
 Chapter 5, Installation Instructions, describes how to install the
Detector, including wiring and mode settings.
 Chapter 6, Operating Instructions, describes the operating
instructions and power-up procedures.
 Chapter 7, Maintenance Instructions, contains the maintenance and
support procedures.
 Chapter 8, Troubleshooting, describes the solutions to problems that
may arise with the Detector.
 Appendix A, Wiring Selection Tables, describes the electrical wire
selection according to the installation configuration.
 Appendix B, Wiring Option Configurations, provides wiring diagrams
for installation.
 Appendix C, Special Condition to Comply to SIL-2 Requirements,
describes the special conditions in order to comply with SIL-2
requirements.