SHIMPO FGS-100-PXL - Manual (Page 6)

Figure 7. More Toolbar Icons
Motion Abort Action
If an emergency situation arises, platform motion can be immediately stopped by clicking on the "STOP"
icon (Fig 7) or from the menu selecting "Run - Abort Operation". This sends a command to the
platform to immediately stop all motion.
If the "STOP" icon is activated, or power was lost during motion, the platform will need to be re-zeroed.
Click on the "Zero The Platform" icon (Fig 7) or from the menu select "Run - Zero Platform".
Manual Control
The Platform can be manually controlled to aid in setting up test fixtures, etc.
Click on the "Manual Platform Control" icon (Fig 7) or from the menu select "Run - Move Platform".
The Manual Platform Control window (Fig 8) is displayed.
Use the various controls to manipulate the platform for the desired effects.
Note: Speed of movement is determined by the currently uploaded configuration. It may be necessary
to modify and upload the configuration to acheive desired results.
Figure 8. Manual Platform Control Window
6
Zero The Platform icon STOP (Abort Operation) icon
Manual Platform Control icon