ADTRAN Express 4100 - Manual (Page 86)

Chapter 3. Terminal Menu Operation and Structure
3-36 Express 4100/4110 User Manual 61200176L2-1
Configuration/Connection List
The Express 4100/4110 uses the Connection List to specify the profile each
user or group of users are to have when connected. Each profile or item in
the Connection List has many configurable parameters giving high flexi-
bility on a per user basis.
Up to 15 profiles can be defined in the Connection List. Calls cannot be
originated or answered unless a Connection List profile is defined. The
Express 4100/4110 factory defaults with one profile called DEFAULT.
This profile is used for any incoming calls when Configuration/Security/
Authentication = None
or when the username of the connecting PPP peer
is not found in the Connection List.
To insert a new profile, press the I key when over the Num column. A new
inserted profile will always be set up with the default parameters. To copy param-
eters from an old profile to this newly inserted profile, use the copy (C) and paste
(P) keys. Entire configuration trees can be copied with this method.
Figure 3-8 shows the Connection List screen.
Figure 3-8. Configuration/Connection List Screen