ADTRAN Express 4100 - Manual (Page 83)

Chapter 3. Terminal Menu Operation and Structure
61200176L2-1 Express 4100/4110 User Manual 3-33
Filter Defines /Pattern Filter Defines
Write security: 2; Read security: 3
The pattern filter is applied to bridge packets only. That is any packet
which is forwarded by the bridge functionality of the Express 4100/4110.
Up to 32 pattern defines can be specified.
Filter Defines /IP Filter Defines
Write security: 2; Read security: 3
The IP filter defines apply to any IP packet, whether it is routed or
bridged. Up to 32 IP defines can be specified.
Name Identifies the filter entry
Offset Offset from beginning of packet of
where to start the pattern comparison
Pattern 64 bits used for comparison. (hexa-
decimal format)
Mask Bits in the pattern to be compared.
(hexadecimal format)
Name Identifies the filter entry
IP Src IP address compared to the source address.
(dotted decimal format)
Src Mask Bits which are used in the source comparison.
(dotted decimal format)
IP Dest IP address compared to the destination address.
(dotted decimal format)
Dest Mask Bits which are used in the destination compari-
son. (dotted decimal format)
Src Port IP source port number used for comparison
Range: 0 to 65535. (decimal format)
Src Port Cmpr Type of comparison that is performed
=
means ports equal to
not = means port not equal to
> means port greater than
< means port less than
None means the source port is not compared