KROHNE BM 100A Handbook User Manual
Page 66
66
Handbook BM 100 A
F3 – Exit
Quit to main title window
F4 – Record Menu
The software will temporarily record the last 5000 readings (the last two hours of operation) without
using the record menu. This information will be displayed on the “Trend” and “Markers” windows.
However, if the user wishes to make a permanent record of measurement data then it is necessary to
set and confirm a measurement record period in this menu. It is also recommended to activate the
“Oscilloscope” option in order to have information on pulse reflection times.
This is set in the window below:
Functions available on this page:-
F1 – Help:
On-line help file
F2 – Start :
Start Record
F3 – Exit:
Exit to real-time measurement main window
Browse:
Find directory and create file
Recording Options:
Start of Recording-
Either now or a delayed start (date and time)
End of Recording-
Either in a given number of hours or a given
date and time.
Signal/ Oscilloscope-
Activate these zones to record these types of
data.
Time slice-
Time spacing between each recorded reading.
Range: 1 to 30 minutes.
Comments-
Complementary
information concerning the
record (50 characters maximum)