KROHNE TIDALFLUX 4300 F EN - Manual (Page 37)

TECHNICAL DATA
7
37
TIDALFLUX 4300 F
www.krohne.com 06/2010 - 4000970001 - TIDALFLUX 4300 F R01 en
7.4 Dimensions and weights
The inner pipe diameter should match the inner diameter of the flowmeter. Since the inner
diameter is not a standard DN size, choose the inner pipe diameter to be just a little bit bigger
than the flow meter diameter. If a lot of sediment or fat is expected the optimal solution is to
produce a diameter compensation ring on both sides to have smooth transits.
EN 1092-1
IP 67 versions: IP 67 versions: IP 67 versions: IP 67 versions:
k = 232 mm / 9.1"
m = 110 mm / 4.3"
n = 202 mm / 7.95"
IP 68 versions: IP 68 versions: IP 68 versions: IP 68 versions:
k = 344 mm / 13.54"
m = 155 mm / 6.1"
n = 284 mm / 11.18"
Nominal size Dimensions [mm] Approx.
Weight
[kg] DN PN a b Øc d j ØD ØD
i
IP 67 IP 68
200 10 350 473 532 291 146 177 340 189 40
250 10 400 521 579 331 166 205 395 231 54
300 10 500 571 629 381 191 235 445 281 66
350 10 500 623 682 428 214 306 505 316 95
400 10 600 681 739 483 242 386 565 365 115
500 10 600 784 843 585 293 386 670 467 145
600 10 600 894 952 694 347 386 780 567 180
700 10 700 1010 1069 812 406 455 895 666 265
800 10 800 1125 1184 922 461 535 1015 768 350
900 10 900 1246 1305 1064 532 625 1115 863 425
1000 10 1000 1338 1396 1132 566 695 1230 965 520
1200 6 1200 1529 1588 1340 670 854 1405 1169 659
1400 6 1400 1732 1791 1521 761 1034 1630 1367 835
1600 6 1600 1932 1991 1721 861 1234 1830 1549 1659