KROHNE TIDALFLUX 4300 F EN - Manual (Page 24)

4
ELECTRICAL CONNECTIONS
24
TIDALFLUX 4300 F
www.krohne.com 06/2010 - 4000970001 - TIDALFLUX 4300 F R01 en
At flow converter side:
At flow sensor side:
Connecting shielding under clamp in connection box of converter
Figure 4-9: Clamping of shields
1 Field current cable
2 Signal cable
Connecting shielding via special cable gland
Figure 4-10: Connecting the shield within the cable gland
1 Wires
2 Isolation
3 Shielding
4 Isolation
5 Feed cable through dome nut and clamping insert and fold shielding over clamping insert. Make sure that the braided
shield overlaps the O-ring by 2 mm / 3/32".
6 Push clamping insert into body.
7 Tighten the dome nut.