KROHNE PipePatro EN - Manual (Page 39)

OPERATION
3
39
PIPEPATROL
www.krohne.com 02/2013 - 4002275001 - MA PipePatrol R01 en
E-RTTM Signature-Test:
Reset Leak Detection
(User)
3 A reset of the leak detection has been executed by the operator on the
operator station.
E-RTTM Differential-Test:
Alarm Acknowledge
(User)
3 An alarm has been confirmed by the operator logged on the operator station.
E-RTTM Differential-Test:
Reset Classificator (User)
3 A reset of the classificator has been executed by the operator on the
operator station.
E-RTTM Differential-Test:
Reset Leak Detection
(User)
3 A reset of the leak detection has been executed by the operator on the
operator station.
Mass Balance: Alarm
Acknowledge (User)
3 An alarm has been confirmed by the operator logged on the operator station.
Mass Balance: Reset
Classificator (User)
3 A reset of the classificator has been executed by the operator on the
operator station.
Mass Balance: Reset Leak
Detection (User)
3 A reset of the leak detection has been executed by the operator on the
operator station.
Shut-In: Alarm
Acknowledge (User)
3 An alarm has been confirmed by the operator logged on the operator station.
Shut-In: Reset
Classificator (User)
3 A reset of the classificator has been executed by the operator on the
operator station.
Shut-In: Reset Leak
Detection (User)
3 A reset of the leak detection has been executed by the operator on the
operator station.
Leak Detection E-RTTM:
Initialising
4 The module for model based LD in pumping conditions is starting up and will
be online soon.
Leak Detection E-RTTM:
Standby
4 The module for model based LD in pumping conditions is initialising the
pipeline conditions, after initialisation the module will start-up.
Leak Detection E-RTTM:
Running
4 The module for model based LD in pumping conditions is running.
Leak Detection E-RTTM:
Error
1 A serious error occurred automatically (e.g. instrument outtake).
Leak Detection Shut-In:
Initialising
4 The module for leak detection in shut-in conditions is starting up and will be
online soon.
Leak Detection Shut-In:
Standby
4 The module for leak detection in shut-in conditions is initialising the pipeline
conditions, after initialisation the module will start up.
Leak Detection Shut-In:
Running
4 The module for leak detection in shut-in conditions is running.
Leak Detection Shut-In:
Error
1 A serious error occurred automatically (e.g. instrument outtake).
Leak Detection Mass
Balance: Initialising
4 The statistical leak detection module is starting up and will be online soon.
Leak Detection Mass
Balance: Standby
4 The statistical leak detection module initialising the pipeline conditions,
after initialisation the module will start-up.
Leak Detection Mass
Balance: Running
4 The statistical leak detection module is running to detect leaks during
standstill conditions.
Leak Detection Mass
Balance: Error
1 A serious error occurred automatically (e.g. instrument outtake).
Data Processing: Best
Condition
4 All field signals are available.
Data Processing: Warning 3 One or more signals are not available. The LDS is still running and
performing leak detection.
Data Processing: Error 1 One or more signals are not available. The LDS is on pending till the
necessary measurements are back online.
Message Priority Description