KROHNE PipePatro EN - Manual (Page 32)

3
OPERATION
32
PIPEPATROL
www.krohne.com 02/2013 - 4002275001 - MA PipePatrol R01 en
Alarm handling procedure Alarm handling procedure Alarm handling procedure Alarm handling procedure
When a leak alarm occurs, this will be highlighted in both the "Status Window" and the "Operator
Window" by means of red boxes (1).
If a leak alarm was raised, by any running LDS, the PipePatrol HMI returns automatically to the
"Main Overview" screen.
Step 1: Recognise leak and switch to "Leak Information" screen
Figure 3-10: Example of leak indication in "Main Window"
1 Module which raise the alarm will be indicate in red (flashing)
2 Alarming system (affected pipeline) will be shown in red
3 Right click on the alarming system to switch to the "Leak Information" screen for details on the leak