KROHNE PipePatro EN - Manual (Page 21)

OPERATION
3
21
PIPEPATROL
www.krohne.com 02/2013 - 4002275001 - MA PipePatrol R01 en
Additional information Additional information Additional information Additional information
• Batch data at inlet and outlet (optional)
3.3.6 Trend
Trend means the presentation of measurement data in a curve. Using a trend enables to review
the actual measurement data. Since all the measured data is stored on the hard disk, the trend
also allows tracking back historical events.
Selection of trends Selection of trends Selection of trends Selection of trends
Use drop down menu and the check boxes from the title of the trend (1) to select which trend
has to be displayed. It is possible either to take a look on the measurements from one station
only (e.g. inlet, outlet or both (overall)) or to select or deselect one or more measurements (e.g.
flow, pressure, temperature etc.).
Trend controls Trend controls Trend controls Trend controls
The control boxes (2) enable to change the settings of the trends and to scroll through the
recorded data.
INFORMATION!
Trending: The screen will switch to trending view.
Figure 3-5: Example of a trend screen
1 Drop down for selection of the type of trend (overall, inlet or outlet)
2 Control boxes for viewing or changing settings