Operation – KROHNE PipePatro EN User Manual
Page 16
3
OPERATION
16
PIPEPATROL
www.krohne.com
02/2013 - 4002275001 - MA PipePatrol R01 en
Data State
Data State
Data State
Data State
The following information can be shown:
• Undefined:
Undefined:
Undefined:
Undefined: The system is not running; no information is available.
• Unknown:
Unknown:
Unknown:
Unknown: The system is filling the internal FIFOs. There is not enough information available
to estimate the pipeline conditions (possible after a restart of the system). The information
will be available soon.
• OK (green):
OK (green):
OK (green):
OK (green): All measured data is available.
• Warning (yellow):
Warning (yellow):
Warning (yellow):
Warning (yellow): Minimum one measured data is not available. This measurement is not
essential for the functionality of the LDS. The system is working by using fall back values.
• Error (red):
Error (red):
Error (red):
Error (red): Minimum one measured data is not available. This measurement is essential for
the functionality of the LDS. The system holds functionality until the necessary
measurements are back online.
Vapour State
Vapour State
Vapour State
Vapour State
The following information can be shown:
• Undefined:
Undefined:
Undefined:
Undefined: The system is not running; no information is available.
• No (green):
No (green):
No (green):
No (green): The pressure along the line is above the predefined vapour pressure (product
property).
• Warning (yellow):
Warning (yellow):
Warning (yellow):
Warning (yellow): The pressure along the line is reaching the area of predefined vapour
pressure (product property).
• Small (red):
Small (red):
Small (red):
Small (red): The pressure along the line is slightly below the predefined vapour pressure
(product property). Small cavitation can be expected.
• Large (red):
Large (red):
Large (red):
Large (red): The pressure along the line is below the predefined vapour pressure (product
property). Large cavitation can be expected.
• Error (red):
Error (red):
Error (red):
Error (red): There is not enough information available to estimate the vapour conditions
(possible reason is no pressure readings are available).