KROHNE OPTITEMP TT 50 C-R EN - Manual (Page 22)

5
OPERATION
22
OPTITEMP TT 50 C/R
www.krohne.com 09/2010 - 4000636502 - MA OPTITEMP TT 50 C/R R03 en
5.1.2 Multi-drop connection (2-wire connection)
As a multipoint connection (Multidrop) with up to 15 devices in parallel (this transmitter or other
HART
® devices).
The current outputs of the devices must be passive!
Burst mode is not supported.
1 Primary master
2 HART
® modem
3 HART ® signal
4 Other HART ® devices or this transmitter (refer also to 7)
5 Terminal 5
6 Terminal 6
7 Device with address > 0 and passive current output, connection of max. 15 devices (slaves)
8 Secondary Master
9 Power supply for devices (slaves) with passive current output
10 Load ≥ 250 Ω (Ohm)
.book Page 22 Monday, September 13, 2010 5:07 PM