KROHNE OPTITEMP TT 50 C-R EN - Manual (Page 17)

ELECTRICAL CONNECTIONS
4
17
OPTITEMP TT 50 C/R
www.krohne.com 09/2010 - 4000636502 - MA OPTITEMP TT 50 C/R R03 en
4.3 Connection diagram of in-head transmitter
DANGER!
Never install or operate this transmitter in potentially explosive areas, it might cause an
explosion that can result in fatal injuries!
DANGER!
To enable HART
® communication, the output circuit must have an output load of at least 250 Ω.
1 Input
2 SmartSense temperature sensor
3 Pt100 3-wire connection
4 Thermocouple
5 Output
6 Modem
7 Voltage supply 10…42 VDC
INFORMATION!
The HART
® modem is connected parallel to the output load or parallel to the output of the
transmitter.
.book Page 17 Monday, September 13, 2010 5:07 PM