beautypg.com

Installation – KROHNE OPTITEMP TT 50 C-R EN User Manual

Page 12

background image

3

INSTALLATION

12

OPTITEMP TT 50 C/R

www.krohne.com

09/2010 - 4000636502 - MA OPTITEMP TT 50 C/R R03 en

Installation

3.1 Notes on installation

3.2 In-head transmitter

These transmitters are intended for installation in DIN B connection heads or larger. The large
Ø7 mm / 0.28" center hole facilitates the electrical connection of the measurement sensor and
the installation. For detailed information refer to the chapter "Dimensions and weights".

INFORMATION!
Inspect the cartons carefully for damage or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.

INFORMATION!
Check the packing list to check if you received completely all that you ordered.

INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.

1 Screw M4
2 Spring
3 Sensor connection cables
4 Protection tube
5 Lock washer

.book Page 12 Monday, September 13, 2010 5:07 PM