beautypg.com

Installation – KROHNE OPTIFLEX 2200 C_F Quickstart EN User Manual

Page 32

background image

2

INSTALLATION

32

OPTIFLEX 2200 C/F

www.krohne.com

08/2013 - 4000622103 - QS OPTIFLEX 2200 R03 en

1 Remove the 2 butterfly screws from the housing. Make sure that spring washer is attached

correctly to the housing (on the weather protection fixture).

2 Lower the weather protection onto the device.
3 Attach the 2 butterfly screws. Make sure that you use the correct holes to attach the weather

protection. The holes must agree with the housing option used (compact vertical (non-Ex or
Ex i-approved etc.)). For more data, refer to the illustration that follows:

Figure 2-37: Installation of the weather protection (general procedure)