Fire-Lite LCD-80FC Remote Fire Indicator - Manual (Page 7)

LCD-80FC Instruction Manual — P/N 53244:B 5/13/2013 7
Section 2: The LCD-80FC Indicator
The LCD-80FC Indicator is a compact, 80-character, backlit LCD fire indicator designed for use
with compatible FACPs (Fire Alarm Control Panels). It should be noted that the LCD-80FC Indi-
cator display will mimic the FACP display.
The LCD-80FC is capable of displaying English-language text of system point status including
device type, independent point alarm, trouble or supervisory, zone and custom alpha labels pro-
grammed into the control panel. The LCD-80FC also provides system status LEDs to display
Power, Alarm, Trouble, Supervisory and Alarm Silenced conditions. The LCD-80FC is capable of
performing local silence and local lamp test.
Communication between the FACP and the LCD-80FC is accomplished over a two-wire serial
interface employing the EIA-485 communication standard. Up to 32 indicators may be connected
to the two-wire EIA-485 circuit. The indicators may be powered from the host FACP or remote UL
listed, filtered, power supplies.
2.1 Compatible Panels
• MS-9200UDLS
• MS-9600LS
• MS-9200UD
• MS-9600
2.2 Features of the LCD-80FC
• 80-character LCD display (20 characters x 4 lines) is backlit under normal and alarm
conditions
• System Status LEDs for AC Power (green), Alarm (red), Trouble (yellow), Supervisory
(yellow) and Alarm Silenced (yellow)
• No programming necessary — duplicates messages at control panel display.
• Local piezo sounder with alarm and trouble resound
• Device type identifiers from the control panel
• Device & zone custom alpha labels from the control panel
• Time/date and device address from the control panel
• EIA-485 connects to control panel terminal port
• Plug-in terminal blocks for ease of installation and service
LC
D
-80
Fcan
ada
.w
m
f
NOTE: The FACP may require programming to function with the LCD-80FC. Refer to the
specific FACP manual for programming information.