DeFelsko PosiTector 6000 v.7.3 Full Manual - Manual (Page 38)

35
Additional Accessories
Rechargeable Battery Pack - 4 AAA eneloop batteries
The PosiTector can operate on rechargeable batteries and
DeFelsko recommends the use of eneloop (NiMH) rechargeables.
eneloop batteries combine the advantages of regular rechargeable
batteries and disposable (Alkaline) batteries. They discharge very
slowly and can be stored for long periods without having self
discharge concerns. Eneloop batteries come pre-charged and
ready to use immediately. See: www.eneloop.info
AC Power Cable Kit
An optional AC Power Cable Kit is available for continuous
operation or battery charging through the PosiTector’s built-in
USB port (as shown on pg. 24). This kit supplies several alternate
power solutions for your battery-operated PosiTector. They allow
the gage to operate continuously without the need for batteries.
Use the cable alone to connect a PosiTector to your PC's built-in
USB port that acts as a continuous power source. Or connect the
cable to the included power adaptor which plugs into any AC wall
electrical outlet, 110 or 220V.
A selection of electrical plugs is included which are capable of
dealing with most country’s outlets.The USB cable provided can
also be used for Accessing Stored Measurement Data
(See pg. 24).
USB Cable
A USB Cable is provided with every PosiTector.
Bluetooth Printer
This lightweight printer receives data from all PosiTector gages
via Bluetooth wireless technology. It is battery-operated and prints
readings and statistical summaries.