DeFelsko PosiTector 6000 v.7.3 Full Manual User Manual
Page 26
23
S c r e e n C a p t u r e
Press both (-)(+) buttons at any time to capture and save an image
copy of the current display. The last 10 screen captures are stored
in memory and can be accessed when connected to a computer
(see PosiSoft USB Drive pg. 27).
PosiSoft.net and PosiSoft Mobile are used to insert an
•
Image and Notes into a batch.
Remove the last reading from the current open batch by
•
pressing (-).
Calibration adjustments cannot be made if any measurements
•
were taken with that setting and stored into a batch.
If memory is ON while continuous measurements are being
•
taken, only the last value on the display (when the probe is
lifted) is stored into memory. Scan Mode stores ALL
measurements into memory (pg. 15).
Each batch can contain a maximum of 10,000 readings.
•
NOTES:
Sample Screen Captures
Summaries
(Advanced models only)
Displays a summary of all stored
batches including the name, probe
type, number of readings and type.
In the following example, Batch 3
(B3) indicates an “F” 6000 coating
thickness probe was used to record a
total of “6” readings in “PA2” mode.