Actiontec MI424WR (GigE) - Manual (Page 90)

86
Actiontec Wireless Broadband Router User Manual
87
Chapter 6 Configuring the Router’s Security
6. Select the protocol that needs to be accessible from the public IP address by
clicking in the check box next to “Enable Port Forwarding for Static NAT ,” then
selecting a protocol from the drop-down menu. Click OK, and OK again.
Repeat these steps to add more static IP addresses from the network.
Advanced Filtering
Advanced filtering is designed to allow comprehensive control over the firewall’s
behavior. Specific input and output rules can be defined, the order of logically
similar sets of rules controlled, and distinctions made between rules that apply to
Internet and local network devices.
To access, select Advanced Filtering from any Security screen. The “Advanced
Filtering” screen appears.