Seed Hawk TOOLBAR 2015 - Manual (Page 30)

SEED HAWK ® 2015 TOOLBAR OPERATOR’S MANUAL 25
4.3 Pre-Operation Checklist
 Inspect tires. Check tire inflation pressure. Adjust if necessary.
 Inspect wheel hub fasteners. Adjust torque to proper setting, if
necessary.
Always check wheel hub fasteners before traveling on
public highways.
 Check depth setting of packer wheel arms. Adjust, if necessary.
 Check depth setting of fertilizer knives. Adjust if necessary.
 Check tractor hydraulic reservoir level. Add hydraulic fluid if level is
low (Refer to tractor Operator’s Manual).
 Inspect all hydraulic lines, hoses, fittings and couplers.
Use a clean
cloth to wipe any accumulated dirt from the implement and
tractor couplers prior to connecting the hydraulic system.
 Inspect seed and dry fertilizer distribution system.
 If operating an XL Series 65' or 66' toolbar, ensure manual wing locks
are disengaged prior to winging down. Ensure that the wings are locked
again prior to transport on public roads.
Wing Lock Arm