Seed Hawk TOOLBAR 2015 - Manual (Page 17)

SEED HAWK ® 2015 TOOLBAR OPERATOR’S MANUAL 12
2.9.2 Applied Safety Signs
CAUTION!
READ OPERATOR’S
MANUAL before
operating machine. Heed
all instructions before
operating machine.
WARNING!
HIGH PRESSURE
FLUID HAZARD.
Relieve pressure on
system before
disconnecting, repairing
or adjusting. Wear proper
hand and eye protection
when searching for leaks.
Keep all components in
good repair.
WARNING!
OVERHEAD WING
HAZARD.
Do not stand underneath
wings, during extending,
raising, or when in the
raised position.
Hydraulic leaks could
cause the wings to fall
unexpectedly. Keep others
away.
1. Read Operator’s Manual before using machine.
2. Stop tractor engine, lower machine to the ground, place all controls in
neutral, set park brake, remove ignition key and wait for all moving parts
to stop before servicing, adjusting, repairing, unplugging or fitting.
3. Install and secure all guards before starting.
4. Keep hands, feet hair and clothing away from moving parts.
5. Do not allow riders.
6. Keep all hydraulic lines, fittings and couplers tight and free of leaks
before using.
7. Clean reflectors, SMV and lights before transporting.
8. Install safety locks before transporting or working beneath components.
9. Add extra lights and use pilot vehicle when transporting during times of
limited visibilty.
10. Use hazard flashers in tractor when transporting.
11. Install safety chain when attaching to tractor.
12. Keep away from overhead electrical lines. Electrocution can occur
without direct contact.
13. Review safety instructions with all operators annually.
4
SH 200
SH 700