Seed Hawk TOOLBAR 2015 - Manual (Page 28)

SEED HAWK ® 2015 TOOLBAR OPERATOR’S MANUAL 23
4.0 Operation
IMPORTANT! After the first 10-20 hours of operation, be sure to change the
tractor’s hydraulic filter when first using a new Toolbar. Some debris may have
collected in the hydraulic system during manufacturing. Changing the filter will
remove this debris, and prevent it from damaging components on the seeder
and tractor.
The picture below is for representation only. Hydraulic hose hook up will vary
depending on tractor and Toolbar configuration.
Opener
Up
Fan 1
Pressure
Wing
Up
Wing
Down
Fan 2
Pressure
Toolbar
Dump
Fan 1
Return
Fan 2
Return
4.1 Hydraulic Hose Hook up