Avaya 4600 - Manual (Page 47)

Issue 2 July 2006 47
NVIKEID VPNPH
ONE This parameter controls the IKE
identifier. The IKE identifier is
used during phase 1 negotiation.
Length of the string cannot
exceed 30 characters.
The XAuth documentation refer
to this parameter as Group
Name because IKE Id is shared
among a group of user and
individual user authentication is
done using XAuth after
establishing IKE phase 1
security association.
If this parameter is left
uninitialized, the VPNremote
Phone uses "VPNPHONE" as
the IKE Identifier.
To set the IKE identifier as
[email protected], use the
following command:
SET NVIKEID
[email protected]
Table 6: VPNremote for 4600 Series IP Telephones Specific Customizable System
Parameters (continued)
Parameter Name Default
Value Description and Value Range Example
2 of 8