Avaya 4600 - Manual (Page 32)

System Parameters Customization
32 Administrator Guide
NVVPNCFGPROF NONE This parameter controls the VPN
configuration profile for the device
vendor and device type. Valid
value is one ASCII numeric digit,
1, 3, 5, 6 and NONE. Values are:
1 = Avaya Security Gateway
3 = Cisco Xauth with PSK
5 = Juniper/Netscreen Xauth with
PSK
6 = Generic PSK
Description:
● Set this parameter to 1 if
Security Gateway vendor is
Avaya.
● Set this parameter to 3 if
the device vendor is Cisco
and Xauth is used for
authenticating phone user.
● Set this parameter to 5 if
device vendor is Juniper,
Xauth is used for
authenticating phone user.
● Set this parameter to 6 if
the device vendor does not
support Xauth.
To set the device VPN
configuration profile to the Avaya
security gateway, use the
following command:
SET NVVPNCFGPROF 1
The following parameters must be
set to specified values.
● If NVVPNCFGPROF=1
then
NVIKECONFIGMODE=2
● If NVVPNCFGPROF=3
then
NVIKECONFIGMODE=1
NVIKEIDTYPE =11
NVIKEXCHGMODE=1
● If NVVPNCFGPROF=5
then
NVIKECONFIGMODE=1
NVIKEIDTYPE=3
NVIKEXCHGMODE=1
● NVVPNCFGPROF=6
then
NVIKECONFIGMODE=2
NVIKEIDTYPE=3
NVIKEXCHGMODE=1
Table 5: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)
Parameter Name Default
Value Description and Value Range Example
2 of 15