beautypg.com

Avaya 4600 User Manual

Page 43

background image

Issue 2 July 2006

43

VPNMONFRQ

0

This value contains the
frequency of VPN monitoring
syslog message in minutes.

If a syslog server IP address is
specified (LOGSRVR) and
VPNMONFRQ contains a valid
value, VPNremote Phone sends
a syslog message every
VPNMONFRQ minutes. This
message contains following data
points:

Duration for which phone
has been up in minutes.

Number of times phone lost
contact with the Security
Gateway but successfully
recovered without
rebooting.

IP Address of the Security
Gateway to which the
phone is connected.

Cumulative IPsec stats
(Packets sent, received,
errors encountered)

To set the VPN monitoring
frequency, use the following
command:
SET VPNMONFRQ 20

DROPCLEAR

1

Controls the policy that defines
the handling on incoming and
outgoing clear packets. Valid
value is one ASCII numeric digit,
0 and 1. Values are:

0 =All clear traffic is accepted.

1 = All clear traffic will be
dropped except for traffic to and
from the security gateway and
the DHCP server.

Table 5: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)

Parameter Name

Default
Value

Description and Value Range

Example

13 of 15