LumaSense Technologies INNOVA 1303 - Manual (Page 6)

Safety Considerations
_______________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 6 of 60
SAFETY CONSIDERATIONS
The Type 1303 Multipoint Sampler and Doser complies with EN61010-1
3 rd Ed. (2010): Safety requirements for electrical equipment for meas-
urement, control and laboratory use. To ensure safe operation and retain
the Type 1303 in safe condition, note the following:
APPLYING POWER
Before using the Type 1303, check that it is set to match the available
mains voltage and that the correct fuse is installed.
SAFETY SYMBOLS
The apparatus is marked with this symbol when it is important that
the user refer to the associated warning statements given in the Instruc-
tion Manual.
Frame or Chassis Protective earth Hazardous Voltage
WARNINGS
Before connecting or disconnecting interface cables, switch off the power
to all instruments.
If the correct function or operating safety of the Type 1303 is impaired,
secure the instrument against further use until the fault is repaired.
Any adjustment, maintenance or repair of the internal parts of the Type
1303 under power must be avoided as far as possible; if unavoidable, it
must only be done by qualified service personnel.