LumaSense Technologies INNOVA 1303 - Manual (Page 18)

Chapter 2
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 18 of 60
Fig. 2.6. Interface address 15
If the system comprise two 1303 instruments the standard interface
address of the second 1303 should be 16, see Fig. 2.7 .
Fig. 2.7. Interface address 16
2.3 Connecting Tubing to the 1303
The 1303 is connected via tubing to:
the sampling points;
the dosing points (if dosing is required);
to a suitable tracer-gas supply;
to the Gas Monitor being used to analyze the gases that are sampled;