LT Security IP85PW - Manual (Page 55)

- 55 -
192.168.1.199; If not, it means the reset is failed, please reset again.
5.2 5.2 5.2 5.2.... Mapping Mapping Mapping Mapping & & & & Access Access Access Access IP IP IP IP Device Device Device Device via via via via WAN WAN WAN WAN
Access IP device via WAN is a very important network function, using this
function, you can access your IP device anywhere anytime.
To access the IP device via WAN, you must map some related ports to the
WAN via router. These ports are: Web Port, Data Transfer Port, Data Control Port,
Remote Transfer Port and Message Port.
If you have finished these setting in your IP device � Setting � Network
Parameters � IP Address & Port: 1.3.3.2.1 IP address & port , Please map the real
ports of your IP device, here take the default ports for example to explain these
ports.
Web Port: Default is 80
Data Transfer Port: Default is 3000,
Data Control Port: Default is 3001
Remote Transfer Port: Default is 3002
Message Port: Default is 4602