LT Security IP85PW User Manual
Page 44
- 44 -
【Se
Se
Se
Send
nd
nd
nd Email
Email If
If
If
If There
There
There
There Are
Are
Are
Are Alarm
Alarm
Alarm
Alarm】 “On” and “Off” optional
【Priority
Priority
Priority
Priority】Default is 0.
【User
User
User
User Name
Name
Name
Name】User name of email box.
【Password
Password
Password
Password】Password of email box
Mail Server
Server
Server
Server IP
IP
IP
IP】Mail Server IP（SMTP）
Mail Server
Server
Server
Server Port
Port
Port
Port】SMTP Server Port.
【Sender's
Sender's
Sender's
Sender's Name
Name
Name
Name】Sender’s name
【Sender's
Sender's
Sender's
Sender's Email
Email】Sender’s email address
【Receiver's
Receiver's
Receiver's
Receiver's Name
Name
Name
Name】Receiver’s name
【Receiver's
Receiver's
Receiver's
Receiver's Email
Email】You can fill in three mail box.
【Test
Test
Test
Test】After you fill in all the parameters, please click “Test” button to test. If the
notice “Successful”, it means all information are correct and you can use email
alarm function. If the notice is “Connect mailsever failed”, please check the
parameters again.
How to set motion detection email alarm function?
�
STEP1
STEP1
STEP1
STEP1
Please set up motion detection, please refer to:
�
STEP2
STEP2
STEP2
STEP2
Please set correct IP address, especially to fill in correctly DNS
according to your IP device setting and network environment.
�
STEP3
STEP3
STEP3
STEP3
Please make sure all information of email alarm setting is correct.
Here is an example of using Foxmail to explain how to set up.