LT Security LTD2516HE - Manual (Page 8)

Digital Video Recorder User Manual version 1.0
8
Fig 2.6 Rear Panel for 8-ch
Item Name Description
1 P/Z Connect to speed dome
2 K/B Connect to keyboard
3 ALARM IN Connect to external sensor1-8
4 HDMI port Connect to high-definition display device (optional)
5 NET Network port
6 VGA port VGA output, connect to monitor
7 Video out Connect to monitor
8 Video in Video input channels from 1-8
9 Audio in 4 CH Audio input
10 POWER SWITCH Power on/off
11 + 5V and GND +5 V and Grounding
12 ALARM OUT 1-ch relay output. Connect to external alarm.
13 USB port
To connect external USB devices like USB flash, USB HDD for backup
or update firmware; or connect to USB mouse
14 Spot out
Connect to monitor as an AUX output channel by channel. Only video
display, no menu show
15 Audio out Audio output, connect to the sound box
16 POWER INPUT DC12V
17 FAN For cooling the device
Tab 2.2 Definitions of Front Panel Buttons
The rear Panel interface for 16-ch is shown as Fig 2.7:
Fig 2.7 Rear Panel for 16-ch
Item Name Description
1 P/Z Connect to speed dome
2 K/B Connect to keyboard
3 ALARM IN Connect to external sensor1-16
4 HDMI port Connect to high-definition display device (optional)
5 NET Network port
6 VGA port VGA output, connect to monitor
7 Video out Connect to monitor
8 Video in Video input channels from 1-16
9 Audio in 4 CH Audio input
10 POWER SWITCH Power on/off
11 FAN For cooling the device
12 + 5V and GND +5 V and Grounding
13 ALARM OUT 1-ch relay output. Connect to external alarm.
14 USB port
To connect external USB devices like USB flash, USB HDD for
backup or update firmware; or connect to USB mouse
15 Spot out
Connect to monitor as an AUX output channel by channel. Only
video display, no menu show
16 Audio out Audio output, connect to the sound box
17 POWER INPUT DC12V
Tab 2.3 Definitions of Rear Panel Buttons
2.4 Remote Controller
It uses two AAA size batteries and works after loading batteries as following:
Step1: Open the battery cover of the Remote Controller
Step2: Place batteries. Please take care the poles (+ and -)
Step3: Replace the battery cover
Notice: Frequently defect checking as following
1. Check batteries poles
2. Check the remaining charge in the batteries
3. Check IR controller sensor is mask