LT Security LTD2516HE - Manual (Page 24)

Digital Video Recorder User Manual version 1.0
24
Fig 4-33 add user-authority
Step2: In the authority interface, assign the definite operation right for that user.
Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address.
Step4: select the user that user wants to delete in the user list box, then click Delete button to delete this user.
Step5: click Change password button to modify the password; click Exit button to exit the current interface.
4.8 P.T.Z configuration
P.T.Z configuration includes two submenus: serial port and advance
① Serial port
Step1: enter into system configuration P.T.Z configuration serial port; refer to Fig 4-34:
Fig 4-34 P.T.Z configuration-serial port
Step2: tick off Enable, setup the value of address, baud rate and protocol according to the settings of the speed dome.
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
Definitions and descriptions of network stream:
②
Advance
Step1: enter into system configuration P.T.Z configuration advance; refer to Fig 4-35:
Parameter Meaning
Address The address of the PTZ device
Baud rate Baud rate of the PTZ device. Range form: 110 、300、600、1200、2400、4800、9600、
19200 、34800、57600、115200、230400、460800、21600.
Protocol Communication protocol of the PTZ device. Range from: NULL 、PELCOP、PELCOD 、
LILIN 、MINKING、NEON、STAR、VIDO、DSCP、VISCA、SAMSUNG、RM110、HY