Hired-Hand ICS-500 Environmental Controller - Manual (Page 2)

Integrated Control System 500 Table of Contents
Integrated Control System - 500
Table of Contents
1. Purpose ___________________________________________________________________________1
2. Ratings/Specifications________________________________________________________________1
3. Warnings __________________________________________________________________________1
4. Warranty __________________________________________________________________________2
5. Installation_________________________________________________________________________2
5.1. Tools Required ____________________________________________________________ 2
5.2. Instructions _______________________________________________________________ 2
6. Components Description ______________________________________________________________3
6.1. Controller ________________________________________________________________ 3
6.1.1. General Description _____________________________________________________________3
6.1.2. Controls ______________________________________________________________________4
6.1.3. Wiring Connections ____________________________________________________________10
6.2. Back-up System __________________________________________________________ 14
6.2.1. General Description ____________________________________________________________14
6.2.2. Controls _____________________________________________________________________14
6.3. Contactor Panel __________________________________________________________ 17
6.3.1. General Description ____________________________________________________________17
6.3.2. Terminal Locations/Types _______________________________________________________17
6.3.3. Controls _____________________________________________________________________17
7. Operation _________________________________________________________________________18
7.1. Curtain Operation ________________________________________________________ 18
7.1.1. Standard _____________________________________________________________________18
7.1.2. Tunnel (Enhanced Version Only) _________________________________________________18
7.2. Stage Operation __________________________________________________________ 19
7.2.1. Manual ______________________________________________________________________19
7.2.2. Automatic ____________________________________________________________________19
7.3. Back-up Operation ________________________________________________________ 20
8. Maintenance ______________________________________________________________________20
9. Wiring Diagrams ___________________________________________________________________20
10. Troubleshooting___________________________________________________________________24
10.1. Curtain machine does not operate Manually. _________________________________________24
10.2. Curtain machine does not operate Automatically______________________________________24
10.3. Temperature Sensors not reading correctly __________________________________________24
10.4. A Stage not working correctly ____________________________________________________24
10.5. If Stages are not working at all ____________________________________________________25
10.6. If Backup System is not working at all ______________________________________________25
10.7. If Variable Speed unit is not working at all __________________________________________25
11. Exploded View/Parts List ___________________________________________________________28
12. Programs ________________________________________________________________________32