Elitegroup ST945GM (V1.0) - Manual (Page 44)

38
Using BIOS
Supervisor Password
This item indicates whether a supervisor password has been set. If the password has been
installed, Insatall displays. If not, Not Install displays.
Change Supervisor Password
You can select this option and press to acess the sub menu. You can use the sub
menu to change the supervisor password.
Press to return to the main menu setting page.
User Passward
This option enables yu to install or change a passward.
User Password
This item indicates whether a supervisor password has been set. If the password has been
installed, Insatall displays. If not, Not Install displays.
Press to return to the main menu setting page.
Exit Without Saving
Highlight this item and press to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box
appears, press to discard changes and exit, or press to return to the main
menu.
This concludes Chapter 3. Refer to the next chapter for information on the software
supplied with the motherboard.
Save & Exit Setup
Highlight this item and press to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
press to save and exit, or press to return to the main menu.
If you have made settings that you do not want to save, use the “Exit
Without Saving” item and press to discard any changes you have
made.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Help Item User Password: Not Installed
F2: Switch to next color F9: Load Default Settings
mnlk : Move ESC: Exit F1: General Help F10: Save Enter : Select +/-/: Value
Install or Change the
password.
User Password