Elitegroup ST945GM (V1.0) - Manual (Page 38)

32
Using BIOS
Integrated Peripherals
These options display items that define the operation of peripheral components on
the system’s input/output ports.
Help Item
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
F2: Switch to next color F9: Load Default Settings
mnlk
: Move ESC: Exit F1: General Help F10: Save Enter : Select +/-/: Value
Onboard IDE Controller [Enabled]
SATA Mode [IDE]
SATA Channels
[Behind PATA]
USB Controller [Enabled]
Legacy USB Support [Enabled]
Onboard AUDIO Function
[Enabled]
Onboard LAN Function [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard 1394 Function [Enabled]
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Serial Port3 Address [3E8]
Serial Port3 IRQ [IRQ11]
Serial Port4 Address
[2E8]
Serial Port4 IRQ [IRQ10]
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE controllers.
SATA Mode (IDE)
Use this item to select the mode of the Serial ATA.
SATA Channels (Behind PATA)
Use this item to select the Serial ATA Channels .
Legacy USB Support (Enabled)
This item allows users to enable or disable the Legacy USB Support function.
USB Controller (Enabled)
This item enables the USB controller. Leave this at the default “Enabled” if you want to
connect USB devices to your computer.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the boot function using the onboard LAN boot rom.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard audio device.
Onboard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Onboard 1394 Function (Enabled)
Use this item to enable or disable the onboard 1394 function.
Serial Port1/2/3/4 Address (3F8/IRQ4/2FB/IRQ3/3EB/2EB)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port address.
Options
Disabled
Enabled