Elitegroup ST945GM (V1.0) - Manual (Page 35)

29
Using BIOS
Press to return to the Standard CMOS Setup page.
IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave this
item at the default value.
Press to return to the main menu setting page.
CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc.
S- ATA 1
S- ATA1 Help Item
Disabled: Disables LBA
Mode.
Auto: Enabled LBA
Mode if the device
supports it and the
device is not already
formatted with LBA
Mode disabled.
Device :Hard Disk
F2: Switch to next color F9: Load Default Settings
mnlk : Move ESC: Exit F1: General Help F10: Save Enter : Select +/-/: Value
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T [Auto]
32Bit Data Transfer [Disabled]
Size :164.06B
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode :4
Async DMA :Multiword DMA-2
Ultra DMA :Ultra DMA-6
S.M.A.R.T. :Supported
Vendor :WDC WD1600JS-23MHB0
Advanced Setup
This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
Hard Disk Drives [Press Enter]
Boot Other Device [Yes]
Max CPUID Value Limit (Disabled)
This item can support Prescott CPUs for old OS. Users please note that under NT 4.0, it
must be set “Enabled”, while under WinXP, it must be set “Disabled”.
Help Item
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
mnlk : Move ESC: Exit F1: General Help F10: Save Enter : Select +/-/: Value
Advanced Setup
Max CPUID Value Limit [Disabled]
Execute Disable Bit
[Enabled]
CPU TM function [Enabled]
Vanderpool Technology [Enabled]
Intel (R) SpeedStep (tm) tech [Automatic]
Quick Power On Self Test [Enabled]
Boot Up NumLock Status [On]
1st Boot Device [Hard Drive]
2nd Boot Device [CD/DVD]
3rd Boot Device [Removeble Dev.]
Disabled for
WindowsXP
F2: Switch to next color F9: Load Default Settings
f