Using bios, Standard cmos setup – Elitegroup ST945GM (V1.0) User Manual
Page 34
28
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
System Date
[Tue 08/15/2006]
f Primary IDE Master
[Not Detected]
Primary IDE Slave
[Not Detected]
S-ATA 1
[Not Detected]
S-ATA 2
[Not Detected]
Help Item
f
f
f
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
F2: Switch to next color
F9: Load Default Settings
mnlk
: Move
ESC: Exit F1: General Help
F10: Save
Enter : Select +/-/: Value
System Time [04 : 50 : 50]
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system time.
IDE BusMaster
[Enabled]
Standard CMOS Setup
System Date & System Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make changes
to the Windows Date and Time Properties utility.
IDE Devices
f
Your computer has one IDE channel which can be installed with one or two devices (Master
and Slave). In addition, this motherboard supports two SATA channels and each channel
allows one SATA device to be installed. Use these items to configure each device on the IDE
channel.
Press
CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Primary IDE Master
Help Item
Select the type
of device connected
to the system.
Device :Hard Disk
Type [Auto]
LBA/Large Mode
[Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode
[Auto]
DMA Mode
[Auto]
S.M.A.R.T
[Auto]
32Bit Data Transfer
[Disabled]
Size :164.76B
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode :4
Async DMA :Multiword DMA-2
Ultra DMA :Ultra DMA-2
S.M.A.R.T. :Supported
Vendor :HDT722516DLAT80
F2: Switch to next color
F9: Load Default Settings
mnlk
: Move
ESC: Exit F1: General Help
F10: Save
Enter : Select +/-/: Value