Elitegroup ST945GM (V1.0) - Manual (Page 15)

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
Jumper Type Description Setting (default)
CLR_CMOS1 3-pin CLEAR CMOS
1-2: NORMAL
2-3: CLEAR CMOS
Before clearing the
CMOS, make sure to
turn off the system.
CF_PWR1 3-pin CF power voltage
CLR_CMOS1
CF_PWR1
1-2: VCC3
2-3: VCC5
1
JP1/2
1 1
JP1/2 10-pin Select 5/12V RI
7-9: NRI1/3
8-10: NRI2/4
JP3 3-pin LVDS Power
1-2: VCC3
2-3: VCC5
1
1
JP3