Using bios, Pci / pnp setup – Elitegroup ST945GM (V1.0) User Manual

Page 40

Using BIOS

Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume at a fixed time based on the system’s RTC (realtime clock). Use
the items below this one to set the date and time of the wake-up alarm. You must use an ATX
power supply in order to use this feature.

Powe On by Ring (Disabled)
This item allows users to enable or disable the ring to wake up the system. If set to Enabled,
users can specify the specific day of month and the exact time to power up the system.

Press to return to the main menu setting page.

PCI / PNP Setup

This optin displays PCI/PNP information about your system.

Allocate IRQ to PCI VGA

[Yes]

Help Item

PCI/PNP Setup

F2: Switch to next color

F9: Load Default Settings

mnlk

: Move

ESC: Exit F1: General Help

F10: Save

Enter : Select

+/-/: Value

Init Display First

[PEG]

Select which graphics
controller to use as
the primary boot
device.

Allocate IRQ to PCI VGA (Yes)

If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You set this
value to No to free up an IRQ.

Init Display First (PCI)

Use this item to decide which device to be the initial display device.

Press to return to the main menu setting page.

USB Device Wakeup from S3 (Disabled)

This item allows users to enable or disable the USB device Wakeup function from S3 mode.