Elitegroup ST945GM (V1.0) - Manual (Page 43)

37
Using BIOS
Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by the kind of processor you have installed in your
system.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Press to return to the main menu setting page.
Load Default Settings
This option opens a dialog box tto ask if you are sure to install optimized defaults or not.
You select [OK], and then press , the Setup Uyility loads all default values; or
select [Cancel], and then press , the Setup Uyility does not load default values.
Supervisor Passward
This option enables yu to install or change a passward.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Item Help Auto Detect DIMM/PCI Clk [Enabled]
Spread Spectrum [Disabled]
Options
Disabled
Enabled
F2: Switch to next color F9: Load Default Settings
mnlk : Move ESC: Exit F1: General Help F10: Save Enter : Select +/-/: Value
Frequency/Voltage Control
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Help Item Supervisor Password: Not Installed
Change Supervisor Password [Press Enter]
F2: Switch to next color F9: Load Default Settings
mnlk : Move ESC: Exit F1: General Help F10: Save Enter : Select +/-/: Value
Install or Change the
password.