Elitegroup ST945GM (V1.0) - Manual (Page 26)

20
Installing the Motherboard
SATA1/2: Serial ATA connectors
These connectors are use to support the new Serial ATA devices for the highest date transfer
rates (3.0 Gb/s), simpler disk drive cabling and easier PC assembly. It eliminates limitations
of the current Parallel ATA interface. But maintains register compatibility and software
compatibility with Parallel ATA.
SPKOUT1: External amplifier for internal speaker out
AUDIO1: Front Panel Audio header
This header allows the user to install auxiliary front-oriented microphone and line-out ports
for easier access.
2 GND
1394A2: IEEE 1394A header
Connect this header to any device with IEEE 1394a interface.
This header is an additional line-out header.
Pin Signal Name Function 1 MIC 2 GND
3 MIC_BIAS 4 VCC
5 EAROUTR 6 LOUTR
7 RSVD 8 Key
9 EAROUTL 10 LOUTL
Pin Signal Name Pin Signal Name
Pin Signal Name Function
1 Ground 2 TX+
3 TX- 4 Ground
5 RX- 6 RX+
7 Ground - -
Pin Signal Name Pin Signal Name
1 LOUTR-X
3 GND
4 LOUTL-X
Pin Signal Name
Pin Signal Name Function 1 TPA1P 2 TPA1M
3 GND 4 GND
5 TPB1P 6 TPB1M
7 CPWR1 8 CPWR1
9 NC 10 GND
Pin Signal Name Pin Signal Name