Elitegroup ST945GM (V1.0) - Manual (Page 37)

31
Using BIOS
Advanced Chipset Setup
This option displays basic information about your system.
Help Item
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
F2: Switch to next color F9: Load Default Settings
mnlk : Move ESC: Exit F1: General Help F10: Save Enter : Select +/-/: Value
Advanced Chipset Setup
Configure DRAM Timing by SPD [Enabled]
VGA Share Memory
[8MB]
DVMT Mode Select [DVMT Mode]
DVMT/FIXED Memory [128MB]
Boot Display Devices [Auto]
Flat Panel Type [Type 1]
Local Flat Panel Scaling [Auto]
TV Connector
[Auto]
HDTV Output [Auto]
TV Standard [VBIOS-Default]
Options
Disabled
Enabled
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded in SPD
during system boot up.
DVMT Mode Select (DVMT Mode)
This item allows you to select the DVMT operating mode.
VGA Share Memory (8MB)
This item lets you allocate a portion of the main memory for the onboard VGA display
application.
DVMT/FIXED Memory (128MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the system
memory as graphics memory, according to system and graphics requirements.
Boot Display Device (Auto)
This item is for Intel define ADD card only.
Flat Panel Type (Type 1)
This item allows you to select the Flat Panel Type.
TV Connector (Auto)
This item enables or disables the TV connector.
HDTV Output (Auto)
This item displays all the modes of High-Definition Television Output.
TV Standard (VBIOS-Default)
This item refers to the way in which your computer receives and displays signals.
Press to return to the main menu setting page.
Local Flat Panel Scaling (Auto)
This item enables or disables the Local Flat Panel Scaling.